Resources
Faq Floor
A floor-level FAQ for South African print and CNC teams, answering the setup, care and fault questions that come up most often.
What an Faq Floor page covers on a busy week
The FAQ Floor page answers the setup, care and fault questions that come up most often around print and CNC equipment. It is a floor-level reference for South African teams who want the basics in plain workshop language.
Name the printer or router first, then note the media, the shift time, and the exact fault seen on site. Inland dust on the Highveld, salt air near Durban and Cape Town, load-shedding, and courier cut-off times all affect the checks that matter. This FAQ page speaks to sign shops and production teams across Johannesburg, Durban, Cape Town, and smaller towns where plain workshop wording is more useful than sales copy.
Photograph the panel, carriage area, control screen, and any damaged stock before cleaning or resetting anything. Include one note on what changed just before the problem, such as a new roll, fresh board batch, bit change, head clean, or power trip. That record helps separate operator setup issues from component faults and repeat material waste.
Checks to do first
Use the page to narrow the fault to media feed, printheads, vacuum, spindle, rails, software, or power quality. Each answer is aimed at the next safe check, not at guesswork from across the workshop. Where settings matter, the answer uses the same names the operator sees on the machine screen or controller.
Before sending the note, match the machine badge, controller name, installed options, and any serial labels to the unit in front of you. Add clear site photos, machine timing, and a short list of what stopped working after the last normal run. Printer and flatbed faults are easier to read from a photo of the print path and the error shown on the control panel.
- Media, vacuum, and feed checks
- Screen errors captured before restart
- Photos, timings, and fault history
Site conditions that change faults
Many workshop problems are tied to the room, not only the machine. Compressed air quality, extension leads, uneven slabs, extractor condition, and stock storage near open doors all show up later as banding, misfeeds, chatter, or poor cut depth. A useful FAQ answer must reflect how South African sign production sites actually run.
Coastal shops often need tighter cleaning discipline around rails, boards, connectors, and exposed metal parts. Inland sites usually battle dust on sensors, encoder strips, fans, and vacuum zones, especially after board cutting. During load-shedding, note whether the fault followed a hard shutdown, inverter transfer, or a generator changeover.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
What to include in your note
Send the FAQ floor note with clear site photos, machine timing, and a straight list of what has already stopped working. Use a subject line that matches the fault.
Write down the machine name, control software, material size, print mode or spindle speed, and the last successful job if you have it. Add any recent changes such as new heads, fresh blades, replaced pumps, firmware updates, or a move within the shop. That makes the FAQ entry easier to follow when purchasing, maintenance, and operators compare the same fault later.

