Specs
Media Path specs
Setup notes and briefing numbers for Media Path.
Feed and tracking specification points
Media Path specs lists the checks tied to feeding, alignment and stable movement through the print area. Teams can compare what is included when recurring media handling faults need proper attention.
Record the printer model, media width, roll weight, and which side starts drifting first. On Highveld sites, fine dust can upset edge sensors and pinch rollers, while coastal humidity in Durban and Cape Town can soften boards and change drag through the carriage area. These specs are meant for sign production teams checking feed consistency, skew, and repeatable alignment on working equipment.
Capture the loaded roll or board position before guides, rollers, or vacuum settings are changed. Include the current take-up setting, heater temperatures where fitted, and any marks on the media edges, because those details often explain telescoping, head strikes, or inconsistent stepping later in the run. A short written note beside the machine helps the next operator compare the setup against the fault.
Checks included
Measurements and observations focus on cases where media will not feed straight or hold position through the print zone. Checks cover roller pressure, vacuum balance, guide placement, encoder condition, tension, and board flatness, with notes that make sense on a busy sign shop shift. Recurring handling faults are diagnosed by looking closely at what is happening at each stage.
Use this spec page alongside the machine record and any previous service notes before parts are swapped or settings are reset. Compare loaded media, accessory fitment, and the operator's current feed settings against the actual hardware on site, then write in through the contact form if the fault needs wider review. Describe the infeed area and the printed result so the handling issue can be matched to the setup.
- Roll feed tension and brake setting
- Edge guide position before calibration
- Photos of infeed, platen, take-up
Southern African handling conditions
Media movement faults often change with site conditions, not only with the printer itself. Johannesburg dust, Durban moisture, Cape Town wind-blown grit, and unstable power can all affect sensor readings, vacuum hold, static, and the way flexible stock tracks at speed. These specs make room for what the room is doing as well as what the machine is doing.
Board work needs a note on warp, corner lift, and how long the sheets sat in storage before loading. Roll jobs need width, core size, remaining diameter, and whether the media walks left or right after the first metre. When power interruptions are part of the story, log the point in the run where movement changed and whether the printer was restarted cold.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Numbers to gather before review
List the feed compensation value, pass mode, media preset, vacuum level, and any recent maintenance on rollers or sensors. Add the substrate name, thickness, width, and whether the issue appears on every job or only on one stock type.
A useful spec note also records what the print shows when tracking goes off, such as banding, head rub, image creep, or uneven margins across the width. Keep that note with the machine details so production, service, and purchasing can refer to the same checks when the fault comes up again.
What our Large-Format Print customers say
Verified Google reviews

